In an industrial environment which are dust laden, people working in it need a lot of assistance in getting clean working surroundings. In this context the Vayuvents Private Limited pulse jet dust collector is the best option because it offers quick relief from dusty environments, giving surroundings in which work can be done normally. It draws dust laden air into it, cleans the air and then discharges it into the environment. This simple process work effectively to remove some of the worst types of dust  present in air, all the dust that has been collected by the filter should be then cleaned so that the system works efficiently.

Some of the many places in which it can be used include plants, warehouses, commercial environments, factories etc. It enables such places to meet quality safety requirements and also to adhere to the EPA emission rules. It is a strong durable machine that is capable of working for long hours without breakdown or failure. Examples of places where you can see this device being uses include processing plants, fabricated shops, grain mills etc, where there is the constant presence of particulate matter. Filter Concept is manufacturer of Pulse Jet Dust Collection system that caters to various industries’ requirement for air quality improvement and enhancing the quality of air released by collecting dust and other impurities from air or gas by removing particulate matter from the air and environment. We are a manufacturer of highly customized units with customized ducting solutions along with our dust collectors for your specific dust collection and application requirements.

Operation -

The dirty or contaminated air enters the dust collector through the inlet and passes through a number of filter cartridges/bags (before the contaminated Air passes through the Filter Bag/Cartridge; baffle plate works as a protecting layer to control/retain heavy particles, which protects filter bags/cartridges to get in touch with heavy particles and damage caused by it) which retains the dust particles on the exterior surface while allowing clean air to pass through the outlet. As the collector operates, the collected dust begins to form dust cake, which eventually diminishes the porosity of the filter cartridges. As the pressure drop increases the ventilation volume of the collector decreases.

To maintain a moderate pressure, drop, the cleaning cycle is employed to provide continuous cleaning of the filter Bags/cartridges. The cleaning system consists of a solenoid valve and time controller, which actuates Solenoid Valve and the Compressed Air Header. These Compressed Air Header momentary burst or pulse of high pressure compressed air through the blow pipe into the filter tube. This Pulse of air creates reverse flow of air, which expands the filter cartridges to remove the collector dust.
 

• The cleaning procedure occurs on a row‐by‐row basis therefore only a fraction of total filter air is interrupted for cleaning allowing continuous ventilation.

​

• The dust cake when pulsed from the filter cartridges falls directly into the bucket at the bottom where it is removed.